JM-M / JF-Mfkrodends2018-04-19T11:23:29-06:00

• 3-PIECE CONSTRUCTION
  
• METRIC
• PTFE LINER AVAILABLE
• STUDS AVAILABLE
• OPTIONAL LUBRICATION FITTING AVAILABLE
• MALE ROD END LOAD RATINGS BASED ON NO LUBRICATION FITTING
• FOR LOAD RATING WITH LUBRICATOR, CONTACT FK ENGINEERING

• BALL
  • 52100 STEEL
  • Rc 56 MIN
  • HARD CHROME PLATED
• BODY
  • LOW CARBON STEEL
  • ZINC PLATED
  • CHROMATE TREATED
• RACE
  • ALLOY STEEL
  • HEAT TREATED
  • ZINC PLATED
  • CHROMATE TREATED

Right Hand Part Number	Left Hand Part Number	B DIA	D DIA	W WTH	T WTH	Ball DIA	A LGTH	N THD	C LGTH	a Mis Angle	ULT Static Radial Load	Approx Weight
		+.065 -.013	+.38 -.38	+.13 -.13	+.13 -.13	REF	+.40 -.40	MM	+1.00 -1.00	REF	(Newton)	(grams)
JM5M*	JML5M*	5	16	8	6.25	11.10	33	M5x0.8	20	14	5,170	12
JM6M*	JML6M*	6	19	9	7	12.70	36	M6x1.0	22	13	7,295	18
JM8M	JML8M	8	22.25	12	8.75	15.88	42	M8x1.25	25	18	13,595	31
JM8MF	JML8MF	8	22.25	12	8.75	15.88	42	M8x1.0	25	18	13,595	31
JM10M	JML10M	10	27	14	10.5	19.05	48	M10x1.5	29	17	20,605	68
JM10MF	JML10MF	10	27	14	10.5	19.05	48	M10x1.25	29	17	20,605	68
JM12M	JML12M	12	30	16	12	22.23	54	M12x1.75	33	17	18,215	78
JM12MF	JML12MF	12	30	16	12	22.23	54	M12x1.25	33	17	18,215	78
JM14M	JML14M	14	34.75	19	13.50	25.40	60	M14x2.0	36	21	29,840	118
JM14MF	JML14MF	14	34.75	19	13.50	25.40	60	M14x1.5	36	21	29,840	118
JM16M	JML16M	16	38	21	14.25	28.58	66	M16x2.0	40	23	32,225	173
JM16MF	JML16MF	16	38	21	14.25	28.58	66	M16x1.5	40	23	32,225	173
JM18M	JML18M	18	42	23	16.25	31.75	72	M18x1.5	44	21	41,300	260
JM20M	JML20M	20	46	25	18	34.93	78	M20x1.5	47	20	50,952	290
JM20MC	JML20MC	20	46	25	18	34.93	78	M20x2.5	47	20	50,952	290
JM22M*	JML22M*	22	50	28	19.50	38.10	86	M22x1.5	51	22	56,238	315
JM25M*	JML25M*	25	60	31	22	42.86	95	M24x2.0	57	19	104,435	500
JM30M**	JML30M**	20	74.93	34.925	25.78	47.62	114.3	M30x2.0	63.5	17	193,732	1,224

* CHECK FOR AVAILABILITY

** TOLERANCE VARIATION FOR “D” & “A” ARE +/- .020, CHECK FOR AVAILABILITY

NEWTON x .2248 = lbf (FORCE)

---

• 3-PIECE CONSTRUCTION
  
• METRIC
• PTFE LINER AVAILABLE
• STUDS AVAILABLE
• OPTIONAL LUBRICATION FITTING AVAILABLE

• BALL
  • 52100 STEEL
  • Rc 56 MIN
  • HARD CHROME PLATED
• BODY
  • LOW CARBON STEEL
  • ZINC PLATED
  • CHROMATE TREATED
• RACE
  • ALLOY STEEL
  • HEAT TREATED
  • ZINC PLATED
  • CHROMATE TREATED

Right Hand Part Number	Left Hand Part Number	B DIA	D DIA	W WTH	T WTH	Ball DIA	A LGTH	N THD	C LGTH	E DIA	F Flat	a Mis Angle	ULT Static Radial Load	Approx Weight
		+.065 -.013	+.38 -.38	+.13 -.13	+.13 -.13	REF	+.40 -.40	MM	+1.00 -1.00	+.25 -.25	+.25 -.25	REF	(Newton)	(grams)
JF5M*	JFL5M*	5	16	8	6.25	11.10	27	M5x0.8	14	11	9	14	7,090	17
JF6M*	JFL6M*	6	19	9	7	12.70	30	M6x1.0	14	13	11	13	10,575	25
JF8M	JFL8M	8	22.25	12	8.75	15.88	36	M8x1.25	17	16	14	18	14,075	40
JF8MF	JFL8MF	8	22.25	12	8.75	15.88	36	M8x1.0	17	16	14	18	14,075	40
JF10M	JFL10M	10	27	14	10.5	19.05	43	M10x1.5	21	19	17	17	20,605	80
JF10MF	JFL10MF	10	27	14	10.5	19.05	43	M10x1.25	21	19	17	17	20,605	80
JF12M	JFL12M	12	30	16	12	22.23	50	M12x1.75	24	22	19	17	18,215	95
JF12MF	JFL12MF	12	30	16	12	22.23	50	M12x1.25	24	22	19	17	18,215	95
JF14M	JFL14M	14	34.75	19	13.50	25.40	57	M14x2.0	27	25	22	21	29,840	160
JF14MF	JFL14MF	14	34.75	19	13.50	25.40	57	M14x1.5	27	25	22	21	29,840	160
JF16M	JFL16M	16	38	21	14.25	28.58	64	M16x2.0	33	27	22	23	32,225	215
JF16MF	JFL16MF	16	38	21	14.25	28.58	64	M16x1.5	33	27	22	23	32,225	215
JF18M	JFL18M	18	42	23	16.25	31.75	71	M18x1.5	36	28.58	25.4	21	41,305	300
JF20M	JFL20M	20	46	25	18	34.93	77	M20x1.5	40	30.15	27	20	50,955	350
JF20MC	JFL20MC	20	46	25	18	34.93	77	M20x2.5	40	30.15	27	20	50,955	350
JF22M*	JFL22M*	22	50	28	19.50	38.10	86	M22x1.5	43	37	32	22	56,240	390
JF25M*	JFL25M*	25	60	31	22	42.86	95	M24x2.0	48	42	36	19	104,435	700
JF30M**	JFL30M**	30	69.85	34.925	25.4	47.625	104.78	M30x2.0	53.98	41.28	38.1	17	193,732	1,093

* CHECK FOR AVAILABILITY

** TOLERANCE VARIATION FOR “D” & “A” ARE +/- .020, CHECK FOR AVAILABILITY

NEWTON x .2248 = lbf (FORCE)